Symantec 360R Administration Guide - Page 203
Table C-31, Field, Description
UPC - 037648240185
View all Symantec 360R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 203 highlights
Field descriptions 203 VPN field descriptions Advanced tab field descriptions Use the Advanced tab to configure advanced VPN settings for phase 1 negotiation, which applies to all clients. Table C-31 Advanced tab field descriptions Section Field Description Global VPN Client Local Gateway Settings Phase 1 ID Type Phase 1 ID (ISAKMP) used by local gateway for VPN clients. Options include: ■ IP Address If you select IP Address, leave the Local Gateway Phase 1 ID text box blank. ■ Distinguished Name If you select Distinguished Name, in Local Gateway Phase 1 ID text box, type a local gateway Phase 1 ID to be used by all clients. Local Gateway Phase 1 ID Value that corresponds to the ID Type. If you selected IP address, leave this text box blank. If you selected Distinguished Name, type a fully qualified domain name. Any client connected to the security gateway must use this Phase 1 ID when defining his or her remote gateway endpoint on the client. The maximum value is 31 alphanumeric characters. VPN Policy VPN policy for VPN client tunnels for phase 2 tunnel negotiation. The list shows pre-defined Symantec policies and any policies you created on the VPN Policies tab. Dynamic VPN Client Settings Enable Dynamic VPN Client Tunnels Lets undefined VPN clients connect to the security gateway for extended authentication. Pre-shared Key Key for authenticating ISAKMP (IKE). It authenticates the remote end of the tunnel. The pre-shared key is between 20 and 64 alphanumeric characters. The pre-shared key on the remote end of this tunnel must match this value.