Symantec 360R Administration Guide - Page 190

190 Field descriptions VPN field descriptions Table C-25 Section Local Security Gateway Dynamic Tunnels field descriptions Field Description PPPoE Session The default PPPoE session is Session 1. This requires an ISP PPPoE account. If you have a single-session PPPoE account, leave the PPPoE session at Session 1. Local Endpoint Port on the security gateway where you want the (Model 360/360R) tunnel to end. Options include: ■ WAN1 ■ WAN2 ID Type ID type used for ISAKMP negotiation. Options include: ■ IP Address ■ Distinguished Name The default value is IP Address. Phase 1 ID Value that corresponds to the ID Type. This value is used to identify the security gateway during phase 1 negotiations. If you selected IP address, type an IP address. If you selected Distinguished Name, type a fully qualified domain name. If you select IP address and leave this field blank, the default value is the IP address of the security gateway's internal interface. The maximum value is 31 alphanumeric characters. NetBIOS Broadcast Allows browsing of the VPN network in the Network Neighborhood and file sharing on a Microsoft Windows computer. A WINS host is needed to accept the traffic. NetBIOS broadcast is disabled by default.