Symantec 360R Administration Guide - Page 174

174 Field descriptions WAN/ISP field descriptions Routing tab field descriptions Use the routing table to configure static or dynamic routing for your security gateway. Table C-16 Routing tab field descriptions Section Field Dynamic Routing Enable RIP v2 Static Routes Route Entry Destination IP Netmask Gateway Interface Metric Routing Table List Destination Mask Gateway Interface Metric Description Enables dynamic routing. Use this only for intranet or department gateways. Select an entry from the list to edit or delete. IP address/subnet for traffic requiring routing. Mask (used with the destination IP address) to set range of IP addresses for traffic requiring routing. IP address of the router to which to send traffic, that meets the IP address and mask combination of destination IP address and netmask. Appliance interface to which the defined traffic is routed. Options include: ■ Internal LAN ■ External WAN 1 ■ External WAN 2 Integer representing the order in which you want the routing statement executed. For example, 1 is executed first. IP address/subnet for traffic requiring routing. Mask (used with the destination IP address) to set range of IP addresses for traffic requiring routing. IP address of the router to which to send traffic, that meets the IP address and mask combination of destination IP address and netmask. Appliance interface to which the defined traffic is routed. Integer representing the order in which you want the routing statement executed. For example, 1 is executed first.