Symantec 360R Administration Guide - Page 129

Logging, monitoring and updates 129 Updating firmware Table 9-1 shows and lists the LiveUpdate server configurations shown in Figure 9-1. Table 9-1 LiveUpdate server configurations Location 1 2 3 Description Symantec LiveUpdate server: http://liveupdate.symantec.com. This is the standard Symantec corporate LiveUpdate site which broadcasts firmware availability. It is the default configuration in your appliance. Internal Live Update server at a remote internal location, protected by a VPN tunnel. Internal LiveUpdate server at a local location. LiveUpdate servers can be on the WAN or LAN, or accessible through a Gatewayto-Gateway VPN tunnel. See "LiveUpdate tab field descriptions" on page 159. To change the LiveUpdate server location 1 In the left pane, click Administration. 2 In the right pane, on the LiveUpdate tab, under General Settings, in the LiveUpdate Server text box, type the IP address or fully qualified domain name for your LiveUpdate server. 3 Click Save. Upgrading firmware manually Firmware upgrades are available from Symantec's Web site. If you do not configure LiveUpdate to automatically download and apply firmware upgrades, or if you are instructed to manually perform an upgrade by Symantec Technical Support, you should check the Symantec Web for the latest version of the firmware. Your current firmware version number is available from the Status screen. The firmware file that is available from Symantec Technical Support is called all.bin. It overwrites your configuration, so before you begin a manual firmware