Symantec 360R Administration Guide - Page 75
Firewall, Enable, To con a special application
UPC - 037648240185
View all Symantec 360R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
Network traffic control 75 Configuring special applications Port triggers can be used very quickly (milliseconds), but for only one computer at a time. The speed with which port triggers are used gives the illusion of allowing multiple computers having the same ports opened. Special Applications entries work best with applications that require low throughput. You may experience reduced performance with multiple computers activating streaming media or a heavy incoming or outgoing volume. The appliance only listens for traffic on the LAN. The computer on the LAN activates the trigger, not traffic from the outside. The LAN application must initiate traffic and you must know the ports or range of ports it uses to set up a special applications entry. If traffic initiates from the outside, you must use an inbound rule. To configure a special application Special applications help with dynamic packet forwarding. Configure a special application for two-way communication. You can then edit it or delete it as your needs change. See "Special Application tab field descriptions" on page 183. To configure a special application 1 In the SGMI, in the left pane, click Firewall. 2 In the right pane, on the Special Applications tab, under Select Applications, in the Name text box, type a name that represents the application. 3 Check Enable. 4 On the Outgoing Protocol drop-down list, select TCP or UDP. 5 In the Outgoing Port Range Start text box, type the first port number of the port range to listen on. 6 In the Outgoing Port Range End text box, type the last number of the port range to listen on. 7 In the Incoming Port Range Start text box, type the first port number in the range to open. 8 In the Incoming Port Range End text box, type the last port number in the range to open. 9 Click Add. To update an existing special application 1 In the SGMI, in the left pane, click Firewall.