Symantec 360R Administration Guide - Page 37

Configuring a connection to the outside network 37 Configuring connectivity 2 For model 320, do the following: ■ In the right pane, on the Main Setup tab, under Connection Type, click PPTP. ■ Click Save. 3 For model 360 or 360R, do the following: ■ Under WAN1 (External), in the Connection Type drop-down list, click PPTP. ■ To use WAN 2, under WAN 2 (External), under HA Mode, click Normal. ■ To use WAN 2, under WAN2 (External), in the Connection Type dropdown list, click PPTP. ■ Click Save. 4 In the right pane, on the PPTP tab, under Connection, check Connect on Demand. 5 In the Idle Time-out text box, type the number of minutes of inactivity after which you want the appliance to disconnect the PPTP connection. 6 In the Server IP Address text box, type the IP address of the PPTP server. 7 If you have a static IP PPTP Internet account, in the Static IP Address text boxes, type the IP address. Otherwise, leave the value at 0. 8 Under User Information, in the User Name text box, type your ISP account user name. 9 In the Password text box, type your ISP account password. 10 In the Verify text box, type your ISP account password. 11 Click Save. Verifying PPTP connectivity Once the appliance is configured to use the PPTP account, verify that it connects correctly. To verify PPTP connectivity See "PPTP tab field descriptions" on page 171. See "Status tab field descriptions" on page 152. 1 In the SGMI, in the left pane, click WAN/ISP. 2 For model 320, in the right pane, on the PPTP tab, under Manual Control, click Connect.