Symantec 360R Administration Guide - Page 153
Status tab field descriptions Continued, Exposed Host
UPC - 037648240185
View all Symantec 360R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 153 highlights
Field descriptions 153 Logging/Monitoring field descriptions Table C-1 Section LAN (External Port) Unit Status tab field descriptions (Continued) Field Description IP Address Displays the IP address of the security gateway. The default value is 192.168.0.1. Physical Address Displays the physical address (MAC) of the security gateway's LAN's port. The default value is the factory setting. Netmask Displays the network mask address as set on the LAN tab. The default value is 255.255.255.0. DHCP Server Displays enabled or disabled, depending on whether the security gateway acts as a DHCP server for connected clients. Firmware Version Displays the factory firmware version or the firmware version from the most recent LiveUpdate or manual update. Language Version Displays the factory version or the most recent update. Model Displays the model number of the security gateway. Exposed Host Displays enabled if you have enabled a computer on your network as an exposed host. Special Applications Displays enabled or disabled. If you have configured any special applications, this field displays enabled. NAT Mode Displays enabled or disabled. If you disable NAT mode, this disables the firewall security functions and the security gateway behaves as a standard router. Only use this setting for intranet security gateway deployments where, for example, the security gateway will be used as a wireless bridge on a protected network. When NAT mode is enabled, the security gateway behaves as a 802.1D network bridge device.