Symantec 360R Administration Guide - Page 41

Configuring a connection to the outside network 41 Configuring connectivity To configure your primary dial-up account 1 In the SGMI, in the left pane, click WAN/ISP. 2 In the right pane, on the Main Setup tab, under Connection Type, click Analog/ISDN. 3 Click Save. 4 On the Dial-up Backup & Analog/ISDN tab, under ISP Account Information, do the following: User Name Type the account user name. Password Type the account password. Verify Password Retype the account password. Dial-up Telephone 1 Type the dial-up telephone number. Dial-up Telephone 2 Optionally, type a backup dial-up telephone number. Dial-up Telephone 3 Optionally, type a backup dial-up telephone number. 5 Under Modem Settings, do the following: Model Select the model of your modem. Line Speed Select the speed at which you want to connect. Dial Type Select the dial type. Redial String Type a redial string. Initialization String Type an initialization string. If you select a modem type other than Other, the initialization string is provided. If you select Other, you must type an initializatio nstring. Line Type Select the type of telephone line. Dial String Type a dial string. Idle Time Out Type the amount of time, in minutes, after which the connection is closed if idle. 6 Click Save. After you click Save, the appliance restarts. Network connectivity is interrupted.