Vtech 5145 User Manual - Page 115
The announcement, message is not clear.
View all Vtech 5145 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 115 highlights
Appendix Troubleshooting Problem Suggestion The answering system does not answer after the correct number of rings. • Make sure the answering system is on (ANS. OFF will appear in the top left corner of the telephone base if the answering system is off). • If the Toll Saver feature is on, the number of rings changes to two when there are new messages stored (page 56). • If the memory is full or if the answering system is off, the system will answer after ten rings. • In some cases, the answering system may be affected by the ringing system used by the local telephone company. The announcement • When recording the announcement, make sure you speak in a normal tone of voice about nine message is not clear. inches from the telephone base. • Make sure there is no background noise (television, music, traffic, etc.) when recording. The answering system does not record message. • Make sure the answering system is on. • Make sure the memory of the answering system is not full. The messages on the answering system are incomplete. • If a caller leaves a very long message, part of it may be lost when the system disconnects the call after four minutes. • If the caller pauses for more than seven seconds, the system stops recording and disconnects the call. • If the memory on the system becomes full during a message, the system stops recording and disconnects the call. • If the caller's voice is very soft, the system may stop recording and disconnect the call. www.vtechphones.com 111