Vtech 5145 User Manual - Page 22

• Before using your Bluetooth enabled device(s) with the telephone base, make sure that your Bluetooth device(s) are not connected to any other device(s). Bluetooth Pairing - This refers to the process of Bluetooth devices registering device information with each other. The telephone base must be paired with a Bluetooth enabled cell phone or headset before the Bluetooth device(s) can be used. Depending on the manufacturer, this is also referred to as Bonding. PIN - By default, the PIN is 0000 for the telephone base and for most Bluetooth devices. PIN information must be exchanged between Bluetooth devices before they can be used. This is also known as a Passkey or Passcode. Bluetooth at a glance The telephone base allows you to pair up to eight Bluetooth devices. You can have a maximum of two paired devices connected at anytime (two cell phones, or one cell phone and one headset), but only one cell phone or headset can be on a call at a time. Once you have paired a device with the telephone base, the pairing information will be stored on the Paired Devices list (page 23). To use a paired device, it must be connected and on the Active Devices list (page 26). To learn more about managing your Bluetooth device(s), see the Managing your Devices section (page 23). To help you set up your Bluetooth device(s), please follow the instructions in each section and refer to the Troubleshooting section for help (page 100). IMPORTANT INFORMATION • Once you pair a device with the telephone base, you do not have to repeat the pairing procedure again, unless you delete the device from the Paired Devices list (page 23). • Press CANCEL on the telephone base at anytime to return to a previous menu. • When adding, removing, or replacing a Bluetooth device on the Active Devices list, all connected devices will temporarily disconnect until the action is complete. It may take up to two minutes to reconnect. 18 www.vtechphones.com