Xerox M118i OmniPage SE User Guide - Page 27

Start button Chapter 2 The OmniPage Toolbox This Toolbox lets you drive the processing. By default it is located along the top of the OmniPage Desktop, just above the working areas. It can be floated and also be docked along the bottom of the desktop. Get Page button Perform OCR button Export Results button Get Pages drop-down list Layout Description drop-down list Export Results drop-down list Automatic processing is started, and can be stopped and re-started with the Start (1-2-3) button. See "Automatic processing" on page 40. Manual processing allows you to process documents page-by-page and step-by-step. Start each step with the three large buttons: the Get Page button (1), the Perform OCR button (2) and the Export Results button (3). See "Manual processing" on page 42. You can switch between automatic and manual processing any time the program is not busy with processing. That means you can switch between them while you are working within a document. You can automatically process some pages, then add more pages with manual processing. After processing a stack of pages automatically, you can inspect the results and then go back to reprocess certain pages manually. This procedure is described in chapter 3. See "Combined processing" on page 43. The OCR Wizard is designed for new users. See "Processing with the OCR Wizard" on page 45. If you have a document open when you start the OCR Wizard, the document will be closed after a prompting to save it. When you have used the OCR Wizard to process and save a document, it remains in the program and can be further processed (adding more pages, re-recognizing pages etc.) with either manual or automatic processing. The OmniPage Desktop 27