Yamaha RX V661 MCXSP10 Manual - Page 101
ADDITIONAL, INFORMATION, English, Problem, Cause, Remedy - zone 2 troubleshooting
UPC - 027108927411
View all Yamaha RX V661 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 101 highlights
Troubleshooting Problem Cause Remedy The sound suddenly goes off. Sound is heard from the speaker on one side only. Only the center speaker outputs substantial sound. No sound is heard from the center speaker. No sound from the presence speakers. No sound is heard from the surround speakers. No sound is heard from the surround back speakers. Zone 2 speaker settings are not available in "SET MENU". FRONT B speakers cannot be activated. No sound from the center, surround or surround back speakers when the FRONT B speakers are activated. Presence speaker settings are not available in "SET MENU". The protection circuitry has been activated because of a short circuit, etc. Check that the speaker impedance setting is correct. Check that the speaker wires are not touching each other and then turn this unit back on. The sleep timer has turned this unit off. Turn this unit on, and play the source again. The sound is muted. Press LMUTE or JVOLUME +/- on the remote control to resume audio output. Incorrect cable connections. Connect the cables properly. If the problem persists, the cables may be defective. Incorrect settings in "SPEAKER LEVEL". Adjust the "SPEAKER LEVEL" settings. When playing a monaural source with a CINEMA DSP program, the source signal is directed to the center channel, and the front and surround speakers output effect sounds. "CENTER SP" in "SET MENU" is set to Set "CENTER SP" to "SML" or "LRG". "NONE". One of the HiFi DSP programs (except for Try another sound field program. "7ch Stereo") has been selected. The sound field programs are turned off. Press ESTRAIGHT to turn them on. You are using a source or program combination that does not output sound from all channels. Try another sound field program. "EXTRA SP ASSIGN" is set to a setting Set "EXTRA SP ASSIGN" to "PRESENCE". other than "PRESENCE". "SUR. L/R SP" in "SET MENU" is set to "NONE". This unit is in the "STRAIGHT" mode and a monaural source is being played back. Set "SUR. L/R SP" to "SML" or "LRG". Press ESTRAIGHT on the front panel so that "STRAIGHT" disappears from the front panel display. "SUR. L/R SP" in "SET MENU" is set to "NONE" and "SB L/R SP" is automatically set to "NONE". Set "SUR. L/R SP" and "SB L/R SP" to a setting other than "NONE". "SUR. B L/R SP" in "SET MENU" is set Set "SUR. B L/R SP" to a setting other than to "NONE". "NONE". "EXTRA SP ASSIGN" is set to a setting Set "EXTRA SP ASSIGN" to "ZONE2". other than "ZONE2". "EXTRA SP ASSIGN" is set to a setting Set "EXTRA SP ASSIGN" to "FRONT B". other than "FRONT B". "FRONT B" in "SPEAKER SET" is set to Set "FRONT B" to "FRONT". "ZONE B". "EXTRA SP ASSIGN" is set to a setting Set "EXTRA SP ASSIGN" to "PRESENCE". other than "PRESENCE". See page 25, 93 - - 40 13 74 73 42 47 37 72 73 47 73 73 72 72 72 72 ADDITIONAL INFORMATION English 97 En