Yamaha RX V661 MCXSP10 Manual - Page 37

BASIC OPERATION SELECTING THE SCENE TEMPLATES Selecting the SCENE templates This unit is equipped with 18 preset SCENE templates for various situations of using this unit. As the initial factory setting, the following SCENE templates are assigned to each SCENE button: SCENE 1: DVD Viewing SCENE 2: Disc Listening SCENE 3: TV Viewing SCENE 4: Radio Listening If you want to use other SCENE templates, you can select the desired SCENE templates from the SCENE template library and assign the templates to the selected SCENE buttons on the front panel and the remote control. Select the desired SCENE template 2 Rotate the IINPUT selector (or set the operation mode selector to KAMP and then press Dl / h) to select the desired template. DVD Movie View 3 Press the FSCENE (or FSCENE) button again to confirm the selection. The selected SCENE template is assigned to the SCENE button. 1 or 1 SCENE template library (Image) 1 Assign the SCENE template to the SCENE button Selecting the desired SCENE template Front panel Remote control Notes • If you do not carry out any operation within 30 seconds from the last operation in these steps, this procedure is automatically canceled. • Once the desired SCENE templates are assigned to the corresponding SCENE buttons, you need to set the input source of the SCENE template on the remote control. See page 84 for details. 1 Press and hold the FSCENE (or FSCENE) button for 3 seconds. The indicator on the selected SCENE button on the front panel starts to flash, and the name of the currently assigned SCENE template appears in the front panel display. 3 seconds 3 seconds 1 or 1 Front panel Remote control English 1 Flashes DVD Viewing 33 En