Yamaha RX V661 MCXSP10 Manual - Page 79

■ Speaker distance C)SP DISTANCE Use this feature to manually adjust the distance of each speaker and the delay applied to the respective channel. Ideally, each speaker should be the same distance from the main listening position. However, this is not possible in most home situations. Thus, a certain amount of delay must be applied to the sound from each speaker so that all sounds will arrive at the listening position at the same time. p p SOUND MENU C)SP DISTANCE 1/2 . UNIT;;;;;;;;feet FRONT L;;;10.0ft FRONT R;;;10.0ft CENTER;;;;10.0ft SWFR;;;;;;10.0ft [ ]/[ ]:Up/Down [p]/[[]:Adjust Unit UNIT Choices: meters (m), feet (ft) Initial setting: [U.S.A. and Canada models]: feet (ft) [Other models]: meters (m) • Select "meters" to adjust speaker distances in meters. • Select "feet" to adjust speaker distances in feet. Speaker distances Control range: 0.30 to 24.00 m (1.0 to 80.0 ft) Control step: 0.10 m (0.5 ft) Initial setting: FRONT L/FRONT R/CENTER/SWFR/SUR. L/SUR. R/ PRNS L/PRNS R: 3.00 m (10.0 ft) SB L/SB R: 2.10 m (7.0 ft) SP DISTANCE FRONT L FRONT R CENTER SWFR SUR. L SUR. R SB L SB R PRNS L PRNS R Adjusted speaker Front left speaker Front right speaker Center speaker Subwoofer Surround left speaker Surround right speaker Surround back left speaker Surround back right speaker Presence left speaker Presence right speaker Customizing this unit (MANUAL SETUP) ■ Equalizer D)EQUALIZER Use this feature to select the parametric equalizer or the graphic equalizer. Equalizer type select EQ TYPE SELECT Use this feature to select the type of equalizer. Choices: AUTO PEQ, CENTER GEQ, EQ OFF p p SOUND MENU D)EQUALIZER EQ TYPE SELECT . CENTER GEQ [ ]/[ ]:CT GEQ [p]/[[]:Select • Select "AUTO PEQ" to use the parametric equalizer adjusted in "AUTO SETUP" (see page 28). • Select "CENTER GEQ" to adjust the built-in 5frequency band graphic equalizer so that the tonal quality of the center speaker matches that of the front left and right speakers. Press Dk / n to display the graphic equalizer screen. • Select "EQ OFF" to deactivate the equalizing feature. Note When you carry out "AUTO SETUP" in advance (see page 28), "AUTO PEQ" is automatically selected as the default setting. Test tone TEST SOUND MENU . TEST >OFF ON -______+ 100Hz ;;;;;; 0dB 300Hz ;;;;;; 0dB 1kHz ;;;;;; 0dB 3kHz ;;;;;; 0dB 10kHz ;;;;;; 0dB p p [ ]/[ ]:Up/Down [p]/[[]:Adjust Use this feature to make adjustments for "CENTER GEQ" while listening to a test tone. Choices: OFF, ON • Select "OFF" to stop test tones and output the currently selected source component. • Select "ON" to output test tones from the center and front left speakers. Notes • The available speaker channels differ depending on the setting of the speakers. • Instead of "SB L" and "SB R", "SB" is displayed if "SB L/R SP" is set to either "SMLx1" or "LRGx1" (see page 73). ADVANCED OPERATION English 75 En