Yamaha RX V661 MCXSP10 Manual - Page 86

[ [ [ Customizing this unit (MANUAL SETUP) ■ Memory guard B)MEMORY GUARD Use this feature to prevent accidental changes to DSP program parameter values and other system settings. Choices: OFF, ON OPTION MENU B)MEMORY GUARD >OFF ON [ ]/[[]:Select [ENTER]:Return • Select "OFF" to turn off the "MEMORY GUARD" feature. • Select "ON" to protect: - sound field program parameters - all "SET MENU" items - all speaker levels - SCENE template parameters Note When "MEMORY GUARD" is set to "ON", you cannot select and adjust any other "SET MENU" items. ■ Audio select C)AUDIO SELECT Use this feature to designate the default audio input jack select setting for the input sources when you turn on the power of this unit. Choices: AUTO, LAST OPTION MENU C)AUDIO SELECT >AUTO LAST [ ]/[[]:Select [ENTER]:Return • Select "AUTO" if you want this unit to automatically detect the type of input signals and select the appropriate audio input jack select setting. • Select "LAST" if you want this unit to automatically select the last audio input jack select setting used for the connected input source. p p ■ Parameter initialization D)PARAM.INI Use this feature to initialize the parameters of each sound field program within a sound field program group. When you initialize a sound field program group, all of the parameter values within that group revert to their initial factory settings. Press the corresponding sound field program selector buttons on the remote control to select the sound field program that you want to initialize. An asterisk (*) appears to the left of the sound field program names that have been changed from their initial factory settings. Choices: CLASSICAL, LIVE/CLUB, ENTERTAINMENT, MOVIE, STEREO, ENHANCER, SUR. DECODE OPTION MENU D)PARAM. INI CLASSICAL LIVE/CLUB *ENTERTAINMENT *MOVIE STEREO ENHANCER SUR. DECODE Press DSP Key Notes • You cannot automatically revert to the previous parameter settings once you initialize a sound field program group. • You cannot separately initialize individual sound field programs. • You cannot initialize any sound field program groups when "MEMORY GUARD" is set to "ON". ■ Zone 2 settings E)ZONE2 SET OPTION MENU E)ZONE2 SET . MAX VOL.;+16.5dB INI.VOL.;;;;;OFF [ ]/[ ]:Up/Down [ ]/[[]:Select Zone 2 Maximum volume MAX VOL. Use this feature to set the maximum volume level in the Zone 2. Control range: 16.5 dB, 15.0 dB to - 30.0 dB Control step: 5.0 dB Notes • The "MAX VOL." setting takes priority over the "INI VOL." setting. For example, when "INI VOL." is set to -20.0 dB and then "MAX VOL." is set to -30.0 dB, the volume level is automatically set to -30.0 dB when you turn on the power of this unit next time. • The "MAX VOL." setting does not affect the output level at the "ZONE 2 OUT" jacks. 82 En