Yamaha RX V661 MCXSP10 Manual - Page 34
Speaker wiring, Speaker size, Speaker distance, Equalizing, Speaker level, Number of speakers, Press - subwoofer problem
UPC - 027108927411
View all Yamaha RX V661 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
[ [ [ Optimizing the speaker setting for your listening room This unit performs the following checks: Speaker wiring WIRING Checks which speakers are connected and the polarity of each speaker. Speaker size SIZE Checks the frequency response of each speaker and sets the appropriate low-frequency crossover for each channel. Speaker distance DISTANCE Checks the distance of each speaker from the listening position and adjusts the timing of each channel. Equalizing EQUALIZING Checks and adjusts the tonal characteristics of all the speakers by the setting of "EQ". Speaker level LEVEL Checks and adjusts the volume level of each speaker. The display changes as follows. AUTO:MENU EXTRA SP ASSIGN ZONE2 >FRONT B PRESENCE NONE SETUP;;;;;;;AUTO EQ;;;;;;;NATURAL . START [ ]/[ ]:Up/Down [ ]/[[]:Select AUTO:CHECK INITIALIZING . WIRING SIZE/DISTANCE EQUALIZING LEVEL CHECK CH=CENTER Exit The results displayed under "RESULT" are as follows. Number of speakers SP Displays the number of speakers connected to this unit in the following order: Front/Back/Subwoofer Speaker distance DIST Displays the speaker distance from the listening position in the following order: Closest speaker distance/Farthest speaker distance Speaker level LVL Displays the speaker output level in the following order: Lowest speaker output level/Highest speaker output level Notes • If "E-10:INTERNAL ERROR" appears during the testing procedure, restart from step 4. • If you selected "RELOAD" in step 4, no test tones are output. • If an error occurs during the "AUTO:CHECK" procedure, the setup procedure is canceled and an error screen appears. For details, see "If an error screen appears" on page 32. • When this unit detects potential problems during the "AUTO SETUP" procedure, "WARNING" and the number of warning messages appears in the above of "RESULT" (see page 32). • Depending on the listening environment, "SWFR PHASE:REV" appears during the "AUTO:CHECK" procedure and "SUBWOOFER PHASE" in "SOUND MENU" (see page 74) is automatically set to "REVERSE". 8 Press DENTER to display the setup results in detail. AUTO:RESULT . RESULT SP : 3/4/0.1 DIST: 14.0/17.0ft LVL : -9.0/+6.5dB >SET CANCEL [ ]/[ ]:Up/Down [ENTER]:Enter AUTO:RESULT . RESULT SP : 3/4/0.1 DIST: 14.0/17.0ft LVL : -9.0/+6.5dB >SET CANCEL [ ]/[ ]:Up/Down [ENTER]:Enter RESULT:WIRING FRONT L;;;;;;;OK [ ]/[[]:Select [ENTER]:Return [ [ 30 En