Yamaha RX V661 MCXSP10 Manual - Page 80

Customizing this unit (MANUAL SETUP) Center graphic equalizer CENTER GEQ Use to match the tonal quality of the center speaker with that of the front left and right speakers. You can adjust 5 frequency bands (100 Hz, 300 Hz, 1 kHz, 3 kHz and 10 kHz). Control range: -6.0 to +6.0 dB Control step: 0.5 dB SOUND MENU TEST >OFF ON -______+ . 100Hz ;;;;;; 0dB 300Hz ;;;;;; 0dB 1kHz ;;;;;; 0dB 3kHz ;;;;;; 0dB 10kHz ;;;;;; 0dB p p [ ]/[ ]:Up/Down [p]/[[]:Adjust y Press Dk / n to select a frequency band and Dl / h to adjust the selected frequency band. Note The "CENTER GEQ" parameter can be adjusted only when "CENTER GEQ" is selected in "EQ TYPE SELECT". ■ Low-frequency effect level E)LFE LEVEL Use this feature to adjust the output level of the LFE (lowfrequency effect) channel according to the capacity of your subwoofer or headphones. The LFE channel carries low-frequency special effects which are only added to certain scenes. This setting is effective only when this unit decodes Dolby Digital or DTS signals. Control range: -20 to 0 dB Control step: 1 dB p p SOUND MENU E)LFE LEVEL . SPEAKER;;;;;;0dB HEADPHONE;;;;0dB [ ]/[ ]:Up/Down [p]/[[]:Adjust Speaker SPEAKER Adjusts the speaker LFE level. Headphone HEADPHONE Adjusts the headphone LFE level. Note Depending on the settings of "LFE/BASS OUT" (see page 72), some signals may not be output at the SUBWOOFER OUTPUT jack. p p p p ■ Dynamic range F)DYNAMIC RANGE Use this feature to select the amount of dynamic range compression to be applied to your speakers or headphones. This setting is effective only when this unit is decoding Dolby Digital and DTS signals. Choices: MIN, STD, MAX • Select "MIN" (minimum) if you regularly listen at low volume levels. • Select "STD" (standard) for general use. • Select "MAX" (maximum) to preserve the greatest amount of dynamic range. SOUND MENU F)DYNAMIC RANGE . SP: MIN STD>MAX HP: MIN STD>MAX [ ]/[ ]:Up/Down [p]/[[]:Select Speaker SP Adjusts the speaker compression. Headphone HP Adjusts the headphone compression. ■ Audio settings G)AUDIO SET Use this feature to adjust the overall audio settings of this unit. SOUND MENU G)AUDIO SET . MUTING TYPE;FULL A.DELAY;;;;;;0ms MAX VOL.;+16.5dB INI.VOL.;;;;;OFF [ ]/[ ]:Up/Down [p]/[[]:Select Muting type MUTING TYPE Use this feature to adjust how much the mute function reduces the output volume (see page 40). Choices: FULL, -20dB • Select "FULL" to completely mute all the audio output. • Select "-20dB" to reduce the current volume by 20 dB. Audio delay AUDIO DELAY Use this feature to delay the sound output and synchronize it with the video image. This may be necessary when using certain LCD monitors or projectors. Control range: 0 to 160 ms Control step: 1 ms 76 En