Yamaha RX V661 MCXSP10 Manual - Page 35
AUTO:RESULT display., and CANCEL and then press
UPC - 027108927411
View all Yamaha RX V661 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
PREPARATION Optimizing the speaker setting for your listening room 9 Press Dl / h repeatedly to toggle between the setup result displays. Results of the speaker connection and wiring Results of the speaker distance from the listening position Results of the setting of each speaker size Results of the parametric equalizer of each speaker Results of the speaker output level y If you are not satisfied with the results or want to manually adjust each parameter, run "MANUAL SETUP" (see page 69). Notes • The distances displayed in the "DISTANCE" results may be longer than the actual distance depending on the characteristics of your subwoofer. • In the "EQ" results, different values may be set for the same frequency to provide finer adjustments. 10 Press DENTER to return to the top "AUTO:RESULT" display. AUTO:RESULT . RESULT SP : 3/4/0.1 DIST: 14.0/17.0ft LVL : -9.0/+6.5dB >SET CANCEL [ ]/[ ]:Up/Down [ENTER]:Enter 11 Make sure the pointer is pointing at "SET" and "CANCEL" and then press Dl / h to select "SET" or "CANCEL". AUTO:RESULT RESULT SP : 3/4/0.1 DIST: 14.0/17.0ft LVL : -9.0/+6.5dB . >SET CANCEL [ ]/[ ]:Up/Down [ENTER]:Enter Choices: SET, CANCEL • Select "SET" to confirm the "AUTO SETUP" results. • Select "CANCEL" to cancel the "AUTO SETUP" results. 12 Press DENTER to confirm your selection. The top "SET MENU" display appears in the OSD. SET MENU . ;AUTO SETUP ;MANUAL SETUP .A;SIGNAL INFO [ ]/[ ]:Up/Down [ENTER]:Enter 13 Press NSET MENU to exit from "SET MENU". p 14 Disconnect the optimizer microphone from this unit. The optimizer microphone is sensitive to heat. Keep it away from direct sunlight and do not place it on top of this unit. y If you change speakers, speaker positions, or the layout of your listening environment, run "AUTO SETUP" again to recalibrate your system. English p 31 En