ZyXEL ENC User Guide - Page 231

Chapter 8 Application Note: If you are editing a profile, the ENC will apply the changes to the associated wireless APs right after you click Ok in this screen. Figure 182 AP Manager > AP Profile > Add/Edit The following table describes the labels in this screen. Table 112 AP Manager > AP Profile > Add/Edit LABEL DESCRIPTION Profile Name Enter up to 32 characters for the name of wireless AP profile. You can use alphanumeric (0-9, a-z, A-Z), underscores (_) and hyphens (-). Spaces are not allowed. SSID Enter a descriptive name (up to 32 printable SCII characters) which identifies the wireless LAN. Wireless clients associating to the access point (AP) must have the same SSID. When a wireless client scans for an AP to associate with, this is the name that is broadcast and seen in the wireless client utility. You can select Room No. from the drop-down list to postfix the configured room number of the AP to the SSID. Channel Select Auto and a channel set (1, 6, 11 or 1, 4, 7, 11 or 1, 5, 9, 13) if you want the AP automatically switches a channel within the channel set when the original channel has problems with wireless interference. Alternatively, select Manual and a specific channel if you want to fix the channel. Transmit Power System Name Set the output power this wireless AP profile uses. If there is a high density of APs in an area, decrease the output power of the ENC to reduce interference with other APs. Select one of the following 100%, 50% or 25%. Select Use device's display name as system name to configure an wireless AP's system name as its display name in the ENC when you apply this profile to the device. Alternatively, select Customized and enter a name to configure the device's system name as the specified name. ENC User's Guide 231