ZyXEL ENC User Guide - Page 79
Entire Network, Discover Type, Max. Hop Level, Edit Discovery Filter, NWA1300-N Series, Values
View all ZyXEL ENC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Chapter 2 Tutorials 3 Select Entire Network in the Discover Type and enter 1 in the Max. Hop Level field. Click Add and enter the IP address and subnet mask of those devices. In this example, enter 192.168.1.0/ 255.255.255.0. 4 You may need to configure the SNMP community if you have changed the default settings on those devices. Leave this section as the defaults if you have no idea about them. Note: The SNMP version selection depends on which SNMP versions your devices can support. Note: The ENC will fail to get a device's information if the device uses a different read community. 5 Select the default discovery filter rule and click Edit, the Edit Discovery Filter screen appears. Select NWA1300-N Series in the Values field. Then click Ok. The ENC will only adds NWA1300-N Series to the OTV through auto-discovery. 6 Click the Discover button to start finding devices. After the ENC finds an NWA1300-N Series device, the ENC will automatically configure the device's ENC IP address setting in order to receive the device's traps later. ENC User's Guide 79