ZyXEL ENC User Guide - Page 293
VLAN, are grouped together into a single VID, vlan0. Note that vlan0 cannot be removed
View all ZyXEL ENC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 293 highlights
Chapter 8 Application 8.7.16.1 Add Authentication Method Follow the steps below to create an authentication method object. 1 Click Wireless Controller Management > Profile > Wireless Profile > Auth. Method. 2 Click Add. 3 Specify a descriptive name for identification purposes in the Name field. You may use 1-30 alphanumeric characters, underscores(_), or dashes (-), but the first character cannot be a number. This value is case-sensitive. For example, "My_Device". 4 Click Add to insert an authentication method in the table. 5 Select a server object from the Method List drop-down list box. 6 You can add up to four server objects to the table. The ordering of the Method List column is important. The NXC5200 authenticates the users using the databases (in the local user database or the external authentication server) in the order they appear in this screen. If two accounts with the same username exist on two authentication servers you specify, the NXC5200 does not continue the search on the second authentication server when you enter the username and password that doesn't match the one on the first authentication server. Click OK to save the settings or click Cancel to discard all changes and return to the previous screen. 8.7.17 VLAN A Virtual Local Area Network (VLAN) divides a physical network into multiple logical networks. The standard is defined in IEEE 802.1q. Note: By default, the NXC5200 acts a bridge device. This means all interfaces (ge1~g8) are grouped together into a single VID, vlan0. Note that vlan0 cannot be removed and the VID cannot be changed. Figure 240 Example: Before VLAN A B C In this example, there are two physical networks and three departments A, B, and C. The physical networks are connected to hubs, and the hubs are connected to the router. ENC User's Guide 293