3Com 3CCFEM556B User Guide - Page 10
Load and configure the communications software - windows me driver
UPC - 662662532154
View all 3Com 3CCFEM556B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
4 CHAPTER 1: INTRODUCTION 3 Load the network driver and supply the configuration information that will give you access to your network. What driver you load depends on your network. Choosing and loading the driver are automatic as part of the Setup procedure. For Windows NT 4.0, Windows 95, Windows 3.x (including Windows 3.1 and Windows for Workgroups 3.11), and DOS, you must follow the procedures documented in this guide to manually configure the LAN+Modem card. 4 Load and configure the communications software you will use for data and fax transmissions. Communications software is provided with the LAN+Modem card. You can also use the modem with resident communications applications such as Terminal and HyperTerminal.
4
C
HAPTER
1: I
NTRODUCTION
3
Load the network driver and supply the configuration
information that will give you access to your network.
What driver you load depends on your network. Choosing
and loading the driver are automatic as part of the Setup
procedure. For Windows NT 4.0, Windows 95, Windows 3.x
(including Windows 3.1 and Windows for Workgroups 3.11),
and DOS, you must follow the procedures documented in
this guide to manually configure the LAN+Modem card.
4
Load and configure the communications software
you will use for data and fax transmissions.
Communications software is provided with the
LAN+Modem card. You can also use the modem with
resident communications applications such as Terminal and
HyperTerminal.