3Com 3CCFEM556B User Guide - Page 63
LAN Problems with NDIS2 Drivers
UPC - 662662532154
View all 3Com 3CCFEM556B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
LAN Problems with NDIS2 Drivers 57 LAN Problems with NDIS2 Drivers Symptom Solution No adapter detected. s LAN+Modem is not in the PCMCIA slot, or is not being recognized by C&SS. Card services could not allocate LAN IRQ. s The value specified for Interrupt in the PROTOCOL.INI file is not available. Try using another address. s Use File/Edit Configuration to check that the LAN IRQ does not conflict with any IRQs already in use. If so, change the IRQ setting (make the same change in PROTOCOL.INI). Card services could not allocate LAN I/O PORT base address. Bank select port failed to respond. s The I/O base-address value in the PROTOCOL.INI file is not available for use. Try another port address. Check that the base address setting in Card and Socket Services matches that in PROTOCOL.INI. Enabler cannot activate the card. s Try to make more resources available (BIOS). Enabler activates the card but it s Try to force Enabler to use a different IRQ cannot see the server. (possibly found by CONFIG), for example: FMENABLE IRQ=A Where A is the hexadecimal value of 10. Enabler fails to find the card s Verify the EMM386.EXE settings in CONFIG.SYS.