3Com 3CCFEM556B User Guide - Page 59
When to Remove the Card Software
UPC - 662662532154
View all 3Com 3CCFEM556B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Removing and Reinstalling LAN+Modem Card 53 When to Remove the Card Software If the power management, COM port assignments, and PCMCIA controller settings are all correct, there may be problems from an earlier installation. You may note the following problems: s One or both of the card functions is not working. s The operating system does not detect the card. s There is a warning tone at startup. (Refer to the documentation supplied with your notebook computer for information on start-up warning tones.) If you are having any of these problems, uninstall the LAN+Modem card and software using the procedures below. Note that any LAN+Modem card-related files changed since the installation will be restored to their prior version. 1 Put Installation Disk 1 in the floppy drive. 2 From the Start menu or File Manager, open the 3Com PC Card Utilities program group and run Uninstall. 3 If Uninstall is not available from the program group, you may have to run it from C:\MHZ (or the directory you specified for Setup). Type: c:\mhz\uninstal.exe [Enter] Reinstall the card using the first-time installation procedure given in Chapter 3. If problems persist: 1 Reboot your computer in Safe Mode. a Restart the computer. b At the startup beep, press [F8]. c Select the Safe Mode option. 2 Open the Device Manager and confirm that the LAN+Modem card is not present under network adapter, modem, or multifunction card device categories. If the LAN+Modem card is present under any of these categories, select it and click Remove.