3Com 3CCFEM556B User Guide - Page 9
PC Requirements, Installation and Setup Overview - card
UPC - 662662532154
View all 3Com 3CCFEM556B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
PC Requirements 3 PC Requirements s 50 Mhz 80486 or faster microprocessor s 10MB of disk space for a complete installation, including the optionally installed speakerphone and communications software included with the LAN+Modem card s PC Card (PCMCIA) Type II, Type III, or CardBus PC Card slot s 3.5-inch floppy drive s Access to a network port for a network connection s Access to a telephone line for a modem connection Installation and Setup Overview The LAN+Modem card installation software performs most of the installation and setup for you. However, before installing the LAN+Modem card, you should know: s What network operating system you will connect to s What information you need to set up a network connection, for example, protocols used s What modem applications you will run and what setup parameters they require Ask your network manager or MIS technician for any setup information that you do not already have. The steps for installing and configuring the LAN+Modem card are: 1 Run Setup to view installation instructions. Setup runs under Windows 95, Windows NT, Windows 3.x and Windows for Workgroups. As a precaution, when you are following software installation procedures, use AC rather than battery power. 2 Install the card in your computer. In some cases, the Setup program will prompt when to insert the card. See Chapter 2, "Inserting and Connecting the Card," for installation procedures.