3Com 3CCFEM556B User Guide - Page 14

Connecting to a Network - driver me

Get 3Com 3CCFEM556B - Megahertz 10/100 LAN PDF manuals and user guides
UPC - 662662532154
View all 3Com 3CCFEM556B manuals
Add to My Manuals
Save this manual to your list of manuals

Page 14 highlights

8 CHAPTER 2: INSERTING AND CONNECTING THE CARD Some operating systems (such as Windows 95) or card and socket services applications detect the card as soon as you insert it, then immediately prompt for the information required to install your network drivers. Experienced users may install the card in this way. However, if you want to install the help, diagnostic, and support utilities provided for the LAN+Modem card, you must run Setup (see "Running Setup" in Chapter 3). Connecting to a Network 1 Verify that you have the cable appropriate for the network cable at your site. 2 Attach the network connector at the end of the network cable to the LAN port (Figure 2) on the LAN+Modem card. 3 Connect one end of the RJ-45 extension cable to the network connector and the other end to the network segment (Figure 4). The LEDs on the network connector are described in Chapter 9. They will light when the network driver is installed and you are connected to the network. Figure 4 Connecting the Twisted-Pair Adapter

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
8
C
HAPTER
2: I
NSERTING
AND
C
ONNECTING
THE
C
ARD
Some operating systems (such as Windows 95) or card and
socket services applications detect the card as soon as you
insert it, then immediately prompt for the information
required to install your network drivers. Experienced users
may install the card in this way. However, if you want to
install the help, diagnostic, and support utilities provided
for the LAN+Modem card, you must run Setup (see
“Running Setup” in Chapter 3).
Connecting to a Network
1
Verify that you have the cable appropriate for the
network cable at your site.
2
Attach the network connector at the end of the
network cable to the LAN port (Figure 2) on the
LAN+Modem card.
3
Connect one end of the RJ-45 extension cable to the
network connector and the other end to the network
segment (Figure 4).
The LEDs on the network connector are described in
Chapter 9. They will light when the network driver is
installed and you are connected to the network.
Figure 4
Connecting the Twisted-Pair Adapter