Brother International MFC-4300 Users Manual - English - Page 124
Not Registered, Pls Open Cover, In Usa, In Canada, In Montreal, Print Overrun, Printer Jam
View all Brother International MFC-4300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 124 highlights
ERROR MESSAGE CAUSE ACTION NOT REGISTERED You tried to access a One Touch or Speed Dial number that is not programmed. Set up the One Touch or Speed Dial number. See pages 7-1 to 7-2. PLS OPEN COVER A page, piece of paper or paper clip, etc. may be jammed inside the MFC. Open the top cover. If you see any jammed paper or other item, gently pull it out, then close the scanner unit. If the error message remains, open and close the top cover again. If the MFC cannot reset itself and return to the date and time prompt, it will display MACHINE ERROR XX. Please call Brother Customer Service and tell them the Machine Error number, at: In USA: 1-800-284-4329 In Canada: 1-800-853-6660 In Montreal: 1-514-685-6464 PRINT OVERRUN (May occur when the MFC is used as a printer.) The available Ram has been exceeded. Unplug the MFC and plug it back in. Data remaining in the memory of the MFC will be deleted. • If you have installed the Windows® printer driver, try again after setting the TrueType mode to "Print as Graphics" in the PRINT menu of your application software. • If this does not clear the error, reduce the complexity of your document or reduce the print resolution. PRINTER JAM The paper is jammed in Do not pull the paper out the MFC. until you see pages 15-6 to 15-7. 15 - 4 T R O U B L E S H O O T I N G A N D R O U T I N E M A I N T E N A N C E