Brother International MFC-4300 Users Manual - English - Page 43
Setting Tone/Pulse Dialing (Canada Only), Entering Text, DIALING:TONE?, SELECT, & SET
View all Brother International MFC-4300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
4 Use the dial pad to enter your name (up to 20 characters), and then press Set. (You can use the chart below to help you enter letters.) 5 Press Stop. The LCD returns to the date and time. If your Station ID has already been programmed, the screen prompts "1" to make a change, or "2" to exit without changing. Setting Tone/Pulse Dialing (Canada Only) Your MFC comes set to accommodate tone (multi-frequency) dialing service. If you have pulse (rotary) dialing service, you must change the dialing mode. 1 Press Function, 1, 1, 7. 2 Press or to select dialing mode, and then press Set. DIALING:TONE? SELECT & SET 3 Press Stop to exit. Entering Text When you are setting certain functions, such as the Station ID, you will have to enter text into the MFC. Most keys on the dial pad have three or four letters printed above them. The keys for 0, # and don't have printed letters because they are used for special characters. By pressing the appropriate number on the dial pad the correct number of times, you can access the character you want. Key once 2 A 3 D 4 G 5 J 6 M 7 P 8 T 9 W twice B E H K N Q U X three times C F I L O R V Y four times 2 3 4 5 6 S 8 Z five times A D G J M 7 T 9 INITIAL SETUP 4-2