Brother International MFC-4300 Users Manual - English - Page 48

5 Setup Receive 5 Basic Receiving Operations Select Receive Mode There are four different receive modes for your MFC. You can choose the mode that best suits your needs by pressing Receive Mode repeatedly until the LCD shows the setting you want to use. LCD How it works When to use it MANUAL (manual receive) You control the phone line and must answer every call yourself. Use this mode when you are using a computer modem on the same line or if you receive very few fax messages. You can also use this mode with Distinctive Ring. FAX ONLY (automatic receive) The MFC automatically answers every call as a fax. For dedicated fax lines. You cannot receive a voice call but you can call out. FAX/TEL* (fax and telephone) The MFC controls the line and automatically answers every call. If the call is a fax it will receive the fax. If the call is not a fax it will ring (double ring) for you to pick up the call. You cannot have an answering machine on the same line, even if it is on a separate jack on the same line. You cannot use the telephone company's Voice Mail in this mode. TAD:ANSWER MACH. (External Telephone Answering Device) The external TAD automatically answers every call. Voice messages are stored on the external TAD. Fax messages are printed. Use this mode if you have an answering machine on your phone line. *In FAX/TEL mode you must set the Ring Delay and F/T Ring Time. If you have extension phones on the line, set the Ring Delay to 4 rings. 5-1 SETUP RECEIVE