Brother International MFC-4300 Users Manual - English - Page 62

3 Enter the fax number. 4 Press Start. The MFC starts scanning the original and the screen displays the job number (#XX) of the fax, and how much memory is available. Then the MFC starts dialing. You can immediately repeat Steps 1 through 4 for the next fax. Note Your MFC normally operates in Dual Access mode. However, you can override Dual Access by using Real Time Transmission. Real Time Transmission When you are sending a fax, the MFC will scan originals into memory before sending. Then, as soon as the phone line is free, the MFC will start dialing and sending the fax. If memory becomes full, the MFC will send the document in real time, even if REAL TIME TX is set to OFF. Sometimes you may want to send an important document immediately, without waiting for memory transmission. You can set REAL TIME TX to ON. 1 Place the original face down in the ADF. 2 Press Function, 1, 3, 9. 9.REAL TIME TX 3 To change the default setting, press or to select ON (or OFF), and then press REALTIME TX:ON? Set. Go to Step 5-OR-For the next fax transmission only, press or to select NEXT FAX ONLY, and then press Set. 4 For the next fax only, press or to select ON (or OFF), and then press Set. 5 Press 1 if you want to select additional settings. The LCD returns to the SETUP SEND menu-OR-Press 2 if you are finished choosing settings, and then go to Step 6. 6 Enter fax number, and then press Start. Checking the Jobs Status Check which jobs are still waiting in memory to be sent. (If no jobs are waiting, the LCD shows NO JOB WAITING.) (See Canceling Jobs in Memory, page 6-4.) 1 If the machine is idle, Press Function, 1, 4. -OR- If the machine is busy, go to step 2. 2 If you have multiple jobs waiting, use or to scroll through the list. 3 Press Stop to exit. 6-3 SETUP SEND