Brother International MFC-J4410DW Users Manual Advanced - English - Page 78
Packing and shipping the machine
View all Brother International MFC-J4410DW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
Packing and shipping the machine A When you transport the machine, use the packing materials that came with your machine. If you do not pack the machine correctly, any damage that may occur in transit may not be covered by your warranty. The machine should be adequately insured with the carrier. IMPORTANT It is important to allow the machine to "park" the print head after a print job. Listen carefully to the machine before unplugging it to make sure that all mechanical noises have stopped. Not allowing the machine to finish this parking process may lead to print problems and possible damage to the print head. a Unplug the machine from the AC power outlet. b Using both hands, use the finger holds on each side of the machine to lift the scanner cover into the open position. Then unplug the machine from the telephone wall jack and take the telephone line cord out of the machine. c Unplug the interface cable from the machine, if it is connected. d Lift the scanner cover (1) to release the lock. Gently push the scanner cover support down (2) and close the scanner cover (3) using both hands. 1 3 2 e Open the ink cartridge cover. f Press the ink release levers to release the ink cartridges and then take out the ink cartridges. (See Basic User's Guide: Replacing the ink cartridges.) g Install the orange protective part and then close the ink cartridge cover. 72