Canon DC220 DC220 DC230 Instruction Manual - Page 39
Playback
UPC - 013803079500
View all Canon DC220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Playback 39 Basic Functions - "ready and waiting" to resume recording. • Sometimes the standby lamp will flash as the camcorder completes some preparations. The camcorder is Quick-Start ready when the lamp stops flashing and stays on. 2 When you wish to resume recording, press QUICK START again. Within approx. 1 second, the camcorder is ready in record pause mode. Playback Playback Playing Back the Video POINTS TO CHECK For some operations you can also use the buttons on the wireless controller. ( 12) NOTES When you wake up the camcorder from standby mode, the following settings will be changed automatically: - Manual focus returns to automatic focus (AF). - Manual exposure adjustment returns to automatic exposure. - Zoom position returns to full wide angle W. In standby mode, the camcorder consumes only half the power used in record pause mode. Using this mode you can save energy when using a battery pack. The camcorder will shut off if left in the QuickStart ready mode for 10 minutes, regardless of the [POWER SAVE] setting ( 50). You can select the length of time until shut-off with the [ STANDBY OFF] setting ( 50). To restore the power if the camcorder shut off, slide the power switch toward MODE and release it, or move the power switch to and back to ON again. If you perform any of the following actions while in standby mode (while the standby lamp is on), the camcorder will return to record pause mode. - Open the disc compartment cover. - Slide the power switch toward MODE. - Change the position of the / switch. 1 Move the power switch to ON, then slide it down toward MODE and release it to set the camcorder in PLAY mode. The green PLAY indicator will turn on. 2 Move the / switch to the (Movies) position. The scene index screen appears with the selection frame on the first scene.