Canon EOS-1Ds Software Instructions EOS DIGITAL SOLUTION DISK Ver.4 for Window - Page 43

3 Adjust the tone curve. ● Position the mouse cursor over one of the 4 points < > on the tone curve, and drag the point to the desired location to adjust the tone curve. Horizontal axis: Input level Vertical axis: Output level ● Adjusted points are shown with < ■ >. ● You can also set the points being adjusted by entering values directly into the [Input] and [Output] boxes. Processing RAW Images Working with Images in File Viewer Utility 4 Press the [Preview] button. \ The adjusted image is shown in the Preview window. 5 Check the settings on the image. ● Check the adjusted image shown in the Preview window and repeat steps 3 and 4 to make further adjustments. ● Clicking the [Shot Settings] button restores the settings to the values used when the shot was taken. ● Clicking the [Save] button saves the adjusted tone curve on your computer. Select the destination folder and then save the tone curve data. You can then register the saved tone curve on the camera using parameter setting. (➞4-24) ● You can load the tone curve data saved on your computer by clicking the [Read] button. 6 Click the [Apply] button. ● This applies the adjusted tone curve to the image and closes the [Adjust Tone Curve] dialog box to end the procedure. ● When the [Linear] checkbox is clicked in the [RAW Image Processing settings] tab sheet in the [Preferences] dialog box, tone curve adjustment cannot be performed. (➞3-40) ● Once you have adjusted the tone curve for channel G, you can then apply the settings of channel G to all the channels by selecting [RGB] in the [Tone curve settings] list box. ● Windows/Macintosh compatibility for tone curve data Tone curve data saved on your computer is compatible between Windows and Macintosh. 3-23