Canon EOS C300 Instruction Manual - Page 107

Special Recording Modes • [INT STBY] changes to [Ü INT REC] while recording frames and [Ü INT STBY] while between intervals. 4 Press the START/STOP button again to stop recording. • All of the recorded frames are joined together into one clip. • The tally lamps go out and [INT STBY] appears at the top of the screen (with [INT] flashing). NOTES • This special recording mode is not available when [w Other Functions] > [Bit Rate/Resolution] is set to [35 Mbps 1440x1080]. Also, you can use only one special recording mode at a time. • While recording, you cannot change the interval or number of frames. • Some frames at the point the recording was stopped may be recorded and added to the end of the clip. • Interval recording mode will be deactivated if the special recording mode is changed or turned off. It will be deactivated also if you change the video configuration. • During this special recording mode, the running mode of the time code (A 84) can be set to [Rec Run] or [Regen.] and the time code advances by the number of frames recorded. If the running mode of the time code is set to [Free Run] or the time code is input from an external source, the running mode will switch to [Rec Run] during special recording mode. When special recording mode is deactivated, the running mode will return to its previous setting. • During special recording mode, the time code signal will not be output from the TIME CODE terminal or HD/SD SDI terminal. 107 Frame Recording Mode Set the number of frames in advance. We recommend operating the camcorder remotely or stabilizing the camcorder, for example, on a tripod. Sound is not recorded in this mode. Configuring Frame Recording Mode 1 Open the [Rec Frames] submenu. [w Other Functions] > [Frame Rec] > [Rec Frames] 2 Select the desired number of frames and then press SET. • Available options depend on the frame rate used: 1, 3, 6 and 9 frames (when [w Other Functions] > [24.00P] is set to [On] or [Frame Rate] is set to [23.98P], [29.97P] or [59.94i]), or 2, 6 and 12 frames (when [w Other Functions] > [Frame Rate] is set to [25.00P], [50.00i], [50.00P] or [59.94P]). [w Other Functions] [Frame Rec] [Rec Frames] [1] Activating Frame Recording Mode and Recording 1 Open the [Special Rec] submenu. [w Other Functions] [w Other Functions] > [Special Rec] 2 Select [Frame Rec] and then press SET. [Special Rec] • [FRM STBY] appears at the top of the screen (with [FRM] flashing). [Off] 3 Press the START/STOP button to begin recording. • The camcorder automatically records the set number of frames. • The tally lamp illuminates. • [FRM STBY] changes to [Ü FRM REC] while recording frames and [Ü FRM STBY] when frames are not being recorded. • Repeat until you finish recording. 4 Open the [Special Rec] submenu.