Canon EOS C300 Instruction Manual - Page 68
ND Filter, Using the ND Filter, Remote Operation Using Wi-Fi Remote
View all Canon EOS C300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
ND Filter ND Filter Using the ND filters allows you keep the aperture within an appropriate 68 range when recording in bright surroundings*. * Closing down the aperture when recording under bright conditions may cause the picture to appear soft or out of focus. To avoid the loss of sharpness due to diffraction, use a denser ND filter or a faster shutter speed (A 62). Operating modes: Using the ND Filter Press the ND FILTER + or - button to select the desired ND filter setting. • Repeatedly pressing ND FILTER + button will change the ND filter setting in the following order: [ND1 2 stops] [ND2 4 stops] [ND3 6 stops] ND filter off. (The ND FILTER - button cycles through the settings in reverse order.) Remote Operation Using Wi-Fi Remote After completing the necessary preparations (A 49), you can adjust the ND filter remotely from a Wi-Fi-enabled device using the Wi-Fi Remote application. Press [ND +] or [ND -] on the Wi-Fi Remote screen. • The function is identical to that of the ND FILTER + and - buttons on the camcorder. • The selected ND filter setting will be displayed on the Wi-Fi Remote screen and will be applied on the camcorder. NOTES • Depending on the scene, the color may change when turning the ND filter on/off. Setting a custom white balance (A 74) may be effective in such case. • If you set an assignable button to [ND +] or [ND -] (A 111), you can press the button to cycle through the ND filter settings.