Canon EOS C300 Instruction Manual - Page 193
Gcopy
View all Canon EOS C300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 193 highlights
Specifications • Shutter Speed Speed (1/3-stop increments, 1/4-stop increments), angle, clear scan, slow, off • # Lens Peripheral Illumination Correction: Available for Canon EF lenses5 5 Some Canon EF lenses are not compatible with peripheral illumination correction. • Sensor Sensitivity (ISO 640 (0 dB), 2000 lux, 89.9% reflection) ! F9 (1920x1080 at 59.94i) " F10 (1920x1080 at 50.00i) • S/N Ratio (ISO 850, using Canon Log gamma) 54 dB (typical, 1920x1080, ! at 29.97P / " at 25.00P) • Subject Illumination (24 dB, with a f/1.2 lens) ! 0.30 lux (29.97P, shutter speed 1/30) " 0.25 lux (25.00P, shutter speed 1/25) • Size of Photos 1920x1080 pixels, 1280x720 pixels (only when capturing a photo from a clip) Terminals • HD/SD SDI Terminal BNC jack, output only, 0.8 Vp-p / 75 Ω, unbalanced HD-SDI: SMPTE 292M Video (1080i or 720P), embedded audio, time code (VITC/LTC) SD-SDI: SMPTE 259M Video (480i or 576i), embedded audio, time code (VITC/LTC) • HDMI OUT Terminal HDMI connector, output only • SYNC OUT Terminal BNC jack, output only, 1 Vp-p / 75 Ω Output signal: HD component video luminance signal (HD-Y), HD analog tri-level signal, Analog blackburst signal, SD composite video • MIC Terminal ∅ 3.5 mm stereo mini-jack, -72 dBV (manual volume center, full scale -18 dB) / 600 Ω Microphone attenuator: 20 dB • × (Headphone) Terminal ∅ 3.5 mm stereo mini-jack, -G to -12 dBV (16 Ω load, volume range Min to Max) / 50 Ω or less • GENLOCK Terminal BNC jack, input only: 1 Vp-p / 75 Ω • TIME CODE Terminal BNC jack, input/output Input: 0.5 Vp-p to 18 Vp-p / 10 kΩ Output: 1 Vp-p / 75 Ω • REMOTE Terminal ∅ 2.5 mm stereo mini-jack • Grip Unit Connection Terminal Proprietary connector for the supplied Grip Unit connection plug • WFT Terminal Proprietary connector for the optional WFT-E6 Wireless File Transmitter or GP-E1 GPS Receiver 193