Canon PowerShot SX740 HS Camera User Guide - Page 66
Adjusting the Flash Output
View all Canon PowerShot SX740 HS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
●● : Manual ●● Calculation of standard exposure is based on the specified metering method (=52). ●● When the ISO speed is fixed, you can compare your specified value (indicated by the position where the exposure level mark moves) to the standard exposure level by pressing the shutter button halfway. The exposure level mark is shown as [ ] or [ ] when the difference from standard exposure exceeds 3 stops. ●● After you set the shutter speed and aperture value, the exposure level may change if you adjust the zoom or recompose the shot. ●● When the ISO speed is fixed, screen brightness may change depending on your specified shutter speed and aperture value. However, screen brightness remains the same when the flash is up and the mode is set to Exposure may not be as expected when the ISO speed is set to [AUTO], because the ISO speed is adjusted to ensure standard exposure relative to your specified shutter speed and aperture value. ●● Image brightness may be affected by Auto Lighting Optimizer. To keep the Auto Lighting Optimizer disabled in mode, add a [ ] mark to [Disable during man expo] on the Auto Lighting Optimizer setting screen. ●● To adjust exposure when ISO speed is set to [AUTO], select a level on the exposure compensation bar. Adjusting the Flash Output Still Images Movies Choose from the three flash levels in / / modes. 1 Enter / / mode. 2 Configure the setting. ●●Choose [ ] menu (=23) > [Flash settings] > [Flash mode] > [Manual] and configure [Flash output]. Before Use Basic Guide Advanced Guide Camera Basics Auto Mode / Hybrid Auto Mode Other Shooting Modes P Mode Tv, Av, and M Mode Playback Wireless Features Setting Menu Accessories Appendix Index 66