Canon REALiS LCOS WUX10 Mark II D Multimedia Projector WUX10 MarkII Users Manu - Page 100
Setting a Password, Enter a 4-digit password using
View all Canon REALiS LCOS WUX10 Mark II D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
Setting Various Function Setting a Password [Other settings] - [Password settings] HDMI DIGITAL PC ANALOG PC COMPONENT VIDEO System settings Other settings Password settings Disables the projector unless the correct password is entered. Registering a Password [Other settings] - [Register password] HDMI DIGITAL PC ANALOG PC COMPONENT VIDEO System settings Other settings Register password You can register a password for starting projection. Off The projector can be used even if no password is entered. On The projector cannot be used unless you enter your password. Press the OK button to accept your setting and then press the MENU button. • [Off] is the factory default. • You cannot set [On] unless you have com- pleted [Register password]. Once you set a password, the password entry screen appears at power-on. Enter a 4-digit password with If the password is valid, the projection starts. If you enter a wrong passwords three times, the power will be turned off. • The power is also turned off if no password is inputted for 3 minutes. To Cancel the Password Turn off the projector and unplug the power plug. Hold down the MENU button on the top control and connect the power plug. Make sure to keep holding down the MENU button until a beep sounds. The password is cancelled (the registered password is also reset). < < < < <