Canon REALiS LCOS WUX10 Mark II D Multimedia Projector WUX10 MarkII Users Manu - Page 136

Specifications ■ Projector Projection Display Model name WUX10 MarkII Display system RGB liquid crystal system Optical system Color separation by dichroic mirror/polarizing beam splitter and color composition by prism Type Reflective liquid crystal panel device Size/Aspect ratio 0.71" x 3/16:10 Drive system Active matrix system Number of pixels/Total Number of pixels 2,304,000 (1920 x 1200) x3 panels/6,912,000 Zoom ratio/Focal length/F value 1.5/f=21.8 to 31.9mm/F1.85 to F2.65 lens Zooming and focusing system Electronic operation/electronic operation (with auto focusing function) Lens shift 10:0 (fixed) Light source 275W high-pressure lamp Screen size (projection distance) 40" to 300" (1.2m/3.9' to 9.1m/12.8') Number of producible colors 16,770,000 colors (full color) Brightness* 3200 lm (at presentation) Contrast ratio 1000:1 (full white:full black, at presentation) Uniformity* 88% (at presentation) Speaker 1W monaural x 1 Maximum input resolution 1920 x 1200 dots Input terminals Video signals ANALOG PC input WUXGA/WSXGA/WXGA/UXGA/SXGA+/SXGA/XGA/SVGA/VGA (scan rate: horizontal: 15 to 75KHz, vertical 50 to 85Hz) DIGITAL PC input WUXGA/WSXGA+/WSXGA/UXGA/SXGA+/SXGA/XGA/SVGA/VGA COMPONENT input 1080p, 1080i, 1035i, 720p, 576i, 576p, 480i, 480p HDMI input 1080p, 1080i, 720p, 576p, 480p VIDEO input NTSC, PAL, SECAM, NTSC4.43, PAL-M, PAL-N DVI-I IN terminal DIGITAL PC, ANALOG PC-1 (DVI-I connector 29-pin) HDMI IN terminal HDMI ver. 1.3 (10-bit deep color) ANALOG PC-2/COMPONENT IN terminal ANALOG PC-2, COMPONENT (mini D-sub 15-pin) VIDEO IN terminal Composite (RCA) CONTROL terminal RS-232C (D-sub 9-pin) Audio Input terminal Audio signal (stereo mini jack x 3) Audio Output terminal Audio signal (stereo mini jack) LAN terminal Network connection (RJ-45) Digital PC TMDS (Transition Minimized Differential Signaling) Input signals Analog PC 0.7Vp-p, positive polarity, impedance = 75Ω Horizontal/vertical synchronization: TTL level, negative or positive polarity Composite synchronization in G signal: 0.3Vp-p, negative polarity, impedance=75Ω Video Video:1Vp-p, negative synchronization, impedance = 75Ω Component: Separate Y Cb/Pb Cr/Pr signal Y: 1Vp-p, Negative synchronization, impedance = 75Ω Cb/Pb: 0.7Vp-p, impedance = 75Ω Cr/Pr: 0.7Vp-p, impedance = 75Ω Audio 142mVrms, impedance = 47 KΩ or more Noise (normal mode/silent mode) 36/32dB Operating temperature 5 °C to 35 °C Power supply AC 100-240 V 50/60 Hz Power consumption (normal mode/silent mode/standby state) 400W/330W/8W (when the network function is off) Dimensions 284 (W) x 114 (H) x 336 (D) mm/11.4 (W) x 4.6 (H) x 13.4 (D) in (excluding protrusions) Weight 5.0 kg/11.02lbs Accessories Remote control, batteries for remote control, power cord, computer connection cable, component cable, carrying bag, lens cover, string for lens cover, User's Manual, and Warranty Card. * 99.99% or more of the LCD panel pixels are effective. During projection, 0.01% or less of pixels may stay lit or unlit due to the characteristics of the LCD panel. * Using the projector continuously for an extended period of time may accelerate the deterioration of optical parts. ■Remote Control Power supply Operating range Dimensions Weight (not including batteries) Two 3.0 V, AAA-size batteries About 5 m (16.4') (to infrared remote receiver) 42 (W) x 22 (H) x 135 (D) mm / 1.7 (W) x 0.9 (H) x 5.3 (D) in 55 g 136