Canon VB-S30VE User Manual - Page 148

External Device Input You can set the operation to be performed when an event is triggered by input from an external device. Note An icon in the [Event and Input/Output] menu of the Camera Viewer will indicate when there is an external device input event (P. 76). [External Device Input Event] Select whether to use the input from an external device, such as a connected sensor, as an event. [Operation Mode] Select the circuit condition to suit the signal input from the connected external device. When [Normally Open] is set, an active event occurs when the terminals of the external device close, and an inactive event occurs when the terminals open. When [Normally Close] is set, an active event occurs when the terminals of the external device open, and an inactive event occurs when the terminals close. [Active Event Operation] Select the operation to be performed when an active event is triggered. If [Enable] is set, [Preset], [Video Record] and [E-mail Notification] will be executed according to their settings when an active event is triggered. [Inactive Event Operation] Select the operation to be performed when an inactive event is triggered. If [Enable] is set, [Preset], [Video Record] and [E-mail Notification] will be executed according to their settings when an inactive event is completed. [Ongoing Active Event Operation] Select the operation to be performed during an active event. This can only be set when [Active Event Operation] is set to [Enable]. If [Enable] is set, [Video Record] and [E-mail Notification] will be executed according to their settings during the active event. [Preset] S30VE S910F If you specify a preset, the camera angle will automatically move to the preset location when an external device input event is triggered. It is necessary to set presets beforehand with [Camera] > [Preset] (P. 118). Important S30VE S910F When the camera is moved to a preset position specified in the [Preset] settings, camera control privileges are released, even if the user has obtained those camera control privileges using the Camera Viewer or other camera control applications. [Video Record] Select whether to record video depending on the event. If you select [Enable] and an external device input event is triggered, video will be transmitted to the recording destination specified in [Video Record] > [Upload] > [Video Record Action] (P. 141). [E-mail Notification] Select whether to send an e-mail notification depending on the event. If [Enable] is selected, e-mail notification will be performed when an external device input event is triggered. To use e-mail notification, you must set [Video Record] > [E-mail Notification] (P. 145) beforehand. [External Device Output for Active Event] Select whether external device output is active or inactive when an active event is triggered. [External Device Output for Inactive Event] Select whether external device output is active or inactive when an inactive event is triggered. [Audio Playback at Active Event] If you select [Enable], the sound clip specified in [Sound Clip] will play back at active events for the external device input. [Audio Playback at Inactive Event] If you select [Enable], the sound clip specified in [Sound Clip] will play back at inactive events for the external device input. [Sound Clip] Select the sound clip when [Audio Playback at Active Event] or [Audio Playback at Inactive Event] has been set to [Enable]. 148