Canon VB-S30VE User Manual - Page 214

B102 Client connection denied [notice] Description %1 %1 request denied[%2] (B102) Client host IP address %2 Denial type (41 | 43 | ...) Meaning Client connection was denied due to an authentication error (41), time specification error (42), insufficient resource (43), specification of unsupported codec (45), specification of unpermitted user level (47), too many clients (49) or invalid operation mode (4a). Countermeasure 41: Check user name, password or user list used when connecting. 42: Check playtime or maximum connection time settings used when connecting. 43: Reconnect or restart. 45: Use supported client software. 47: Check user level used when connecting. 49: Check client number settings. 4a: Check if usage of audio server is enabled. B103 Client forcibly disconnected [notice] Description %1 %2 Meaning %1 access denied[%2] (B103) Client host IP address Denial type (41 | 42 | 4a) Connection was initially permitted, but the setting has subsequently been changed to prohibit access, thereby triggering a forced disconnection (the denial type is the same with B102). B201 Event notification failure [warning] Description %1 %2 Meaning cannot notify %1 event [%2] (B201) Event type (ald) Error number Failed to notify event. B202 Event receive failure [warning] Description %1 Meaning cannot recv event [%1] (B202) Error number Failed to receive event. B203 Audio message send failure [warning] Description audio message send error %1 [%2] (B203) %1 Message type %2 Error number Meaning Failed to send audio message. B204 Audio message receive error [warning] Description %1 audio message recv error [%1:%2] (B204) Error number %2 Reason for error Meaning Failed to receive audio message.  Camera application warning C201 Day/Night Mode switching warning [warning] Description Can't switch Day/Night mode, because current mode is Auto.(C201) Meaning Day/Night Mode could not be switched. Countermeasure Set Day/Night Mode to manual. C211 Camera control command overflow [warning] Description command queue overflowed (C211) Meaning The camera control command queue overflowed, and some commands were discarded. Countermeasure Allow a longer interval (200 ms) for sending the camera control command.  Video warning V200 Video input warning [warning] Description video %1 warning - %2 (V200) %1 Video number %2 Meaning Error number An error that permits recovery of the video input system was detected. Countermeasure Change video size or video quality, or decrease data size for each JPEG image.  Uploader warning A120 Resolution of upload destination name failed [notice] Description Meaning uploader cannot resolve the server name (A120) The name of the upload destination could not be resolved. 214