Canon VB-S30VE User Manual - Page 153
Video Record] > [Upload] > [Video Record Action] P. 141., E-mail Notification]
View all Canon VB-S30VE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 153 highlights
If you select [Enable] and a timer event is triggered, video will be transmitted to the recording destination specified in [Video Record] > [Upload] > [Video Record Action] (P. 141). [E-mail Notification] When [24-Hour Continuous Setting] is set to [Disable], select whether to send an e-mail notification depending on the timer event. If [Enable] is selected, e-mail notification is performed when a timer event is triggered. To use e-mail notification, you must set [Video Record] > [E-mail Notification] (P. 145) beforehand. [External Device Output] When [24-Hour Continuous Setting] is set to [Disable], set whether external device output is active or inactive at [Start Time] and [End Time] of a timer. [Repeat Interval] is not supported. [Switch Day/Night] When [24-Hour Continuous Setting] is set to [Disable], select the Day/Night Mode switching behavior when a timer event is triggered. This can only be set with [Timer 1]. Select [Switch to Day Mode] to switch to Day Mode at the start time, and Night Mode at the end time. Select [Switch to Night Mode] to switch to Night Mode at the start time, and Day Mode at the end time. [Repeat Interval] is not supported. Important • If you set [Start Time] and [End Time] and select a preset with [Start Time Preset], the Day/Night setting in [Camera] > [Preset] > [Camera Settings] > [Day/Night] (P. 118) is given priority. Therefore, even if you set [Switch Day/Night] to [Switch to Day Mode] or [Switch to Night Mode], the [Switch Day/Night] setting will be disabled if the opposite setting has been configured in [Preset] > [Camera Settings]. S30VE S910F • When [Day/Night] in [Camera] > [Initial Setting] is set to [Auto] (P. 109), [Switch Day/Night] will not happen when a timer event is triggered. • When the [Switch Day/Night] settings switch Day/Night Mode, camera control privileges are released, even if the user has obtained those camera control privileges using the Camera Viewer or other camera control applications. Setting Page 4 153