Canon VB-S30VE User Manual - Page 179
[Event] > [Linked Event] Using Event Combinations, Linked Event 1 to 4
View all Canon VB-S30VE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 179 highlights
[Event] > [Linked Event] Using Event Combinations By linking two types of events, a single event is triggered. Select AND/OR for the event linking method. You can set the operations to perform, such as recording video or sending e-mail notifications, when a linked event is triggered. 4 The following settings can be configured here. • Linked Event 1 to 4 • Event 1, 2 • Operation Setting Page Note You can check the linked event status on the [Event and Input/Output] menu of the Camera Viewer (P. 77). Linked Event 1 to 4 You can register up to four linked events. You can link the following events: [Volume Detection], [External Device Input], [Timer] and [Intelligent Function]. [Linked Event] Select whether to use a linked event. [Event Linking Method] Select the event linking conditions. [AND]: A new linked event is triggered if both event types selected with [Event 1] and [Event 2] are triggered. Set [Event Order] and [Event Gap] for this. [OR]: A new linked event is triggered if either event type selected with [Event 1] or [Event 2] is triggered. [Event Order] You can select the order two events must be triggered when [Event Linking Method] is set to [AND]. If set to [None], the order will not be considered. [Event Gap (seconds)] Enter the interval between two events that must be triggered when [Event Linking Method] is set to [AND]. A new linked event is triggered if the second event triggers within the specified interval after the first event was triggered. Event 1, 2 Specify the two events to be linked. The settings are the same for both. [Event Type] Select the event type for linking. [Volume Detection] Select whether an ON event or OFF event triggers a linked event in [Volume Detection Status]. 179