Cisco ACE-4710-K9 Administration Guide - Page 126
Cisco 4700, Series Application Control Engine Appliance Virtualization Configuration, Guide
View all Cisco ACE-4710-K9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 126 highlights
Class Map and Policy Map Configuration Quick Start Chapter 4 Configuring Class Maps and Policy Maps Table 4-1 Layer 3 and Layer 4 Network Traffic Class Configuration Quick Start (continued) Task and Command Example 9. (Optional) Specify the destination IP address and subnet mask as a matching criteria in the class map. host1/Admin(config-cmap)# match destination-address 172.16.20.1 255.255.0.0 10. (Optional) Specify a TCP or UDP port number or port range as a matching criteria in the class map. host1/Admin(config-cmap)# match port tcp eq 23 Table 4-2 Layer 3 and Layer 4 Network Management Traffic Class Configuration Quick Start Task and Command Example 1. If you are operating in multiple contexts, observe the CLI prompt to verify that you are operating in the desired context. If necessary, log directly in to, or change to, the correct context. host1/Admin# changeto C1 host1/C1# The rest of the examples in this table use the Admin context, unless otherwise specified. For details on creating contexts, see the Cisco 4700 Series Application Control Engine Appliance Virtualization Configuration Guide. 2. Enter configuration mode. host1/Admin# config Enter configuration commands, one per line. End with CNTL/Z host1/Admin(config)# 4-12 Cisco 4700 Series Application Control Engine Appliance Administration Guide OL-11157-01