Cisco ACE-4710-K9 Administration Guide - Page 382

Configuring HTTP and HTTPS Management Traffic Services Chapter 9 Configuring the XML Interface REVIEW DRAFT - CISCO CONFIDENTIAL The syntax of this command is as follows: policy-map type management first-match map_name The map_name argument specifies the name assigned to the Layer 3 and Layer 4 network management policy map. Enter an unquoted text string with no spaces and a maximum of 64 alphanumeric characters. When you use this command, you will access policy map management configuration mode. For example, to create a Layer 3 and Layer 4 network traffic management policy map, enter: host1/Admin(config)# policy-map type management first-match MGMT_XML-HTTPS_POLICY host1/Admin(config-pmap-mgmt)# To remove a policy map from the ACE, enter: host1/Admin(config)# no policy-map type management first-match MGMT_XML-HTTPS_POLICY Specifying a Layer 3 and Layer 4 Traffic Class with the Traffic Policy To specify the HTTP or HTTPS traffic management traffic class created with the class-map command to associate traffic with the traffic policy buse the class command. his command enters the policy map management class configuration mode. The syntax of this command is as follows: class {name1 [insert-before name2] | class-default} The arguments and keywords, and options are as follows: • name1-The name of a previously defined Layer 3 and Layer 4 traffic class, configured with the class-map command, to associate traffic to the traffic policy. Enter an unquoted text string with no spaces and a maximum of 64 alphanumeric characters. 9-18 Cisco 4700 Series Application Control Engine Appliance Administration Guide OL-11157-01