Cisco ACE-4710-K9 Administration Guide - Page 186
Displaying Service Policy Configuration Information
View all Cisco ACE-4710-K9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 186 highlights
Viewing Class Maps, Policy Maps, and Service Policies Chapter 4 Configuring Class Maps and Policy Maps Displaying Service Policy Configuration Information To display service policy statistics, use the show service-policy command in Exec mode. The statistics that appear in the output are dependent on the configuration of the associated Layer 3 and Layer 4 policy map. The show service-policy command displays the following information: • VLAN to which the policy is applied • Class map associated with the policy • Status of any load-balancing operations The syntax of this command is: show service-policy policy_name [detail] The keywords, options, and arguments are as follows: • policy_name-Identifier of an existing policy map that is currently in service (applied to an interface) as an unquoted text string with a maximum of 64 alphanumeric characters. • detail-(Optional) Displays a more detailed listing of policy map statistics and status information. 4-72 Note The ACE updates the counters that the show service-policy command displays after the applicable connections are closed. For example, to display the service policy statistics for the HTTP_INSPECT_L4POLICY policy map, enter: host1/Admin# show service-policy HTTP_INSPECT_L4POLICY To clear the service policy statistics, use the clear service-policy command. The syntax of this command is: clear service-policy policy_name For the policy_name argument, enter the identifier of an existing policy map that is currently in service (applied to an interface). For example, to clear the statistics for the policy map REMOTE_MGMT_POLICY that is currently in service, enter: host1/Admin# clear service-policy REMOTE_MGMT_POLICY Cisco 4700 Series Application Control Engine Appliance Administration Guide OL-11157-01