Cisco ACE-4710-K9 Administration Guide - Page 349
Creating and Configuring a Layer 3 and Layer 4 Class Map
View all Cisco ACE-4710-K9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 349 highlights
Chapter 8 Configuring SNMP Configuring SNMP Management Traffic Services Creating and Configuring a Layer 3 and Layer 4 Class Map To create a Layer 3 and Layer 4 class map to classify the SNMP management traffic that can be received by the ACE, use the class-map type management command in configuration mode. This command allows the ACE to receive network management traffic by identifying the incoming IP protocols that the ACE can receive by using the client source host IP address and subnet mask as the matching criteria. A class map of type management defines the allowed network traffic as a form of management security for protocols such as SNMP. A class map can have multiple match commands. You can configure class maps to define multiple SNMP management protocol and source IP address commands in a group that you then associate with a traffic policy. The match-all and match-any keywords determine how the ACE evaluates multiple match statements operations when multiple match criteria exist in a class map. The syntax of this command is as follows: class-map type management [match-all | match-any] map_name The keywords, arguments, and options are as follows: • match-all | match-any-(Optional) Determines how the ACE evaluates Layer 3 and Layer 4 network traffic when multiple match criteria exist in a class map. The class map is considered a match if the match commands meet one of the following conditions: - match-all -All of the match criteria listed in the class map match the network traffic class in the class map (typically, match commands of the same type). - match-any-Only one of the match criteria listed in the class map matches the network traffic class in the class map (typically, match commands of different types). The default setting is to meet all of the match criteria (match-all) in a class map. • map_name-Name assigned to the class map. Enter an unquoted text string with no spaces and a maximum of 64 alphanumeric characters. OL-11157-01 Cisco 4700 Series Application Control Engine Appliance Administration Guide 8-39