Cisco ACE-4710-K9 Administration Guide - Page 341
Configuring an SNMP Contact, Configuring an SNMP Location
View all Cisco ACE-4710-K9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 341 highlights
Chapter 8 Configuring SNMP Configuring an SNMP Contact Configuring an SNMP Contact To specify the contact information for the SNMP system, use the snmp-server contact command in configuration mode. You can specify information for only one contact name. The syntax of this command is as follows: snmp-server contact contact_information Enter the contact_information argument as a quoted text string with a maximum of 240 alphanumeric characters including spaces. If the string contains more than one word, enclose the string in quotation marks (" "). You can include information on how to contact the person; for example, a phone number or an e-mail address. For example, to specify SNMP system contact information, enter: host1/Admin(config-context)# snmp-server contact "User1 [email protected]" To remove the specified SNMP contact name, enter: host1/Admin(config)# no snmp-server contact Configuring an SNMP Location To specify the SNMP system location, use the snmp-server location command in configuration mode. You can specify only one location. The syntax of this command is as follows: snmp-server location location Enter the location as the physical location of the system. Enter a text string with a maximum of 240 alphanumeric characters including spaces. If the string contains more than one word, enclose the string in quotation marks (" "). For example, to specify SNMP system location information, enter: host1/Admin(config)# snmp-server location "Boxborough MA" To remove the specified SNMP system location information, enter: host1/Admin(config)# no snmp-server location OL-11157-01 Cisco 4700 Series Application Control Engine Appliance Administration Guide 8-31