Cisco ACE-4710-K9 Administration Guide - Page 309
Fsm_ft_state_standby_hot-state That, Track_host Or Track_interface.
View all Cisco ACE-4710-K9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 309 highlights
Chapter 7 Configuring Redundant ACE Appliances Displaying Redundancy Information Table 7-6 Field Descriptions for the show ft track Command Output (continued) Field Description My State (Cont.) • FSM_FT_STATE_STANDBY_HOT-State that indicates that the local standby context has all the state information it needs to statefully assume the active state if a switchover occurs. My Config Priority Priority configured on the FT group in the local ACE. My Net Priority Priority of the FT group equal to the configured priority minus the priority of the FT tracking process failures, if any. My Preempt Preemption value of the FT group in the local ACE. Possible values are Enabled or Disabled. Context Name Name of the context that is associated with the FT group. Context ID Identifier of the context that is associated with the FT group. Track Type Type of object being tracked. Possible values are TRACK_HOST or TRACK_INTERFACE. State State of the tracking process. Possible values are TRACK_UP or TRACK_DOWN. Priority Priority of the tracking process. Transitions Number of times that the active member of the FT group switched over to the standby member. Probe Count Number of probes associated with a TRACK_HOST process. Probes Down Number of failed probes. OL-11157-01 Cisco 4700 Series Application Control Engine Appliance Administration Guide 7-57