Cisco ACE-4710-K9 Administration Guide - Page 65
to edit the kernel command line. From the GRUB menu, choose
View all Cisco ACE-4710-K9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Chapter 1 Setting Up the ACE Modifying the Boot Configuration 3. Press Esc when the countdown initiates on the GNU GRUB multiboot loader. The following GRUB menu appears. GNU GRUB version 0.95 (639K lower / 3144640K upper memory) image(c4710ace-mz.3.0.0_AB0_0.453.bin) * * image(c4710ace-mz.3.0.0_AB0_0.488.bin) * * * * 4. In the GRUB menu, use the arrow keys to select from the ACE images loaded in Flash memory. The ACE image entry is highlighted in the list. 5. Type e to edit the kernel command line. From the GRUB menu, choose ignorestartupcfg=1. 6. Press Esc to return to the GRUB menu. 7. Press enter to boot the selected software version. The ACE boot screen appears as follows: kernel=(hd0,0)/ACE_APPLIANCE_RECOVERY_IMAGE.bin ro root=LABEL=/ auto console=tt yS0,9600n8 quiet bigphysarea=32768 ignorestartupcfg=1 [Linux-bzImage, setup=0x1400, size=0x43ff5d2] IP-Config: Incomplete network configuration information. INIT: version 2.85 booting INIT: Entering runlevel: 3 Testing PCI path .... This may take some time, Please wait .... PCI test loop , count 0 PCI path is ready Starting services... . Starting sysmgr processes.. Please wait...Done!!! switch login: admin Password: admin OL-11157-01 Cisco 4700 Series Application Control Engine Appliance Administration Guide 1-39